Steel Frame Homes in Türkiye: Standards & Guide | Passive Steel Homes
TS 825 addresses heating and cooling calculation; EKB energy documentation is a separate process.
Project Checklist for Türkiye
Applicable Energy Standards & Certifications for Türkiye
Statutory building codes, government subsidy benchmarks, and voluntary green building certifications applicable in Türkiye:
Passive House / Passivhaus
A voluntary whole-building performance and certification route. Product certification and building certification have different scopes.
LEED Residential / Homes
A voluntary residential sustainability certification route covering energy and other building-quality topics. Eligibility and version must match the project.
nZEB and Zero-Emission Buildings
Nearly zero-energy and zero-emission buildings are different concepts. The EU transition includes 2028 for new publicly owned buildings and 2030 for all new buildings, subject to national implementation.
States, Cantons & Regional Codes in Türkiye
Explore state-level building codes, regional climate zones, and local planning procedures:
High-seismic zone (North Anatolian Fault) solutions using ultra-light gauge steel engineering with direct factory dispatch from Kocaeli.
Designed for intense Mediterranean sun and Western Anatolia seismic grabens: solar control glazing, external thermal blinds, rapid steel assembly.
Cooling-load focused passive steel villas designed for high ambient humidity and scorching summers.
Super-insulated passive steel homes engineered for extreme diurnal temperature swings and cold winters in Ankara, Konya and Eskişehir.
Steep-slope foundation anchoring, corrosion-proof galvanized steel frames and waterproof facade systems for the rainy Black Sea coast.
Sub-zero engineering (-35°C), heavy snow load structural frames (>2.0 kN/m²) and triple-glazed passive shells for Eastern Turkey.
Engineered for 45°C+ summer heatwaves, dust tightness and rapid post-seismic reconstruction quality.
Division of Responsibilities on Site
SerVilla Scope
Structural CFS framing production, building envelope insulation and weather barrier layers, assembly engineering, site supervision and logistics coordination.
Local Professional Scope
Building permit application, local planning approval, geotechnical survey and foundation slab execution, plus final local energy certification.
Climate Zone & Envelope Engineering for Türkiye
Superior seismic safety engineered with a CFS frame 6 to 8 times lighter than concrete (TBDY 2018 / Eurocode 8). Continuous exterior rockwool insulation and solar-controlled triple glazing prevent summer overheating across all climate zones.
U-Value & Performance Benchmarks for Türkiye
TS 825 Thermal Insulation Standard; BEP / NZEB RegulationTarget thermal transmittance values for cold-formed steel envelopes adapted to statutory benchmarks in Türkiye:
| Building Element | Statutory Baseline | SerVilla Target |
|---|---|---|
| Exterior Wall | U ≤ 0.18 – 0.24 W/m²K | U ≤ 0.11 – 0.14 W/m²K |
| Roof / Attic | U ≤ 0.14 – 0.20 W/m²K | U ≤ 0.08 – 0.12 W/m²K |
| Windows & Doors | Uw ≤ 1.00 – 1.30 W/m²K | Uw ≤ 0.75 – 0.85 W/m²K (Triple Glazed) |
| Airtightness | n50 ≤ 1.5 – 3.0 h⁻¹ | n50 ≤ 0.60 h⁻¹ |
| Ventilation | Natural or Mechanical Exhaust | ≥ 85% Heat Recovery MVHR |
Logistics, Customs & Site Timeline for Türkiye
Factory-to-Site DispatchEurocode Structural Engineering, Snow, Wind & Seismic Safety in Türkiye
EN 1993 • EN 1998 • EN 1991SerVilla cold-formed steel frames are engineered specifically for Türkiye in full accordance with Eurocode 3 (EN 1993-1-3), Eurocode 1 (site-specific snow & wind action maps), and Eurocode 8 (earthquake resilience). Fully verified calculation dossiers and 3D IFC models are supplied for local building control approval.
Energy Efficiency Grants & Subsidies in Türkiye
High-performance steel envelopes qualify for low-carbon grants and subsidized green mortgage schemes:
Wall U-values down to 0.11 W/m²K cut primary energy demand by 50-70% below statutory baseline caps.
Access preferential interest rates from European mortgage lenders for A+ EPC certified envelopes.
Fully aligned with EU Taxonomy circular economy directives with zero on-site construction waste.
Featured Architectural Models for Türkiye
Three architectural concepts specifically engineered for Türkiye climate zone, statutory snow/wind actions (EN 1991) and envelope performance:
Other European Delivery Markets & Country Guides
SerVilla exports precision passive steel homes across the EU and EFTA jurisdictions:
Official Code Sources
- https://meslekihizmetler.csb.gov.tr/haberler/isi-yalitim-standardi-tebligi-guncellendi-290597
- https://meslekihizmetler.csb.gov.tr/haberler/yeni-binalarda-yenilenebilir-enerji-zorunlulugu-yuzde-10-olacak-289813
Explore Other Model Concepts
Compare alternative footprints, storey options and spatial arrangements.
Model 25-1003 • 99 m²
Model 25-1003 — 99 m², 1 storey
Model 25-1004 • 114 m²
Model 25-1004 — 114 m², 1 storey
Model 25-1005 • 135 m²
Model 25-1005 — 135 m², 1 storey
Frequently Asked Questions
Essential answers regarding steel construction, energy targets and project delivery.
Each country has specific energy performance regulations (e.g. GEG in Germany, RE2020 in France, Part L in Ireland). We design our steel envelope to comply with your local code requirements.
Statutory permits, local planning submissions, and national structural certification must be signed by a registered local architect or engineer in your jurisdiction.
Steel frame kits and building materials are packed into shipping containers or trucks. Transport and customs clearance terms (Incoterms like DAP or CIF) are detailed in each quote.
Yes. We offer experienced erection supervisors who oversee local assembly teams to ensure structural alignment and airtight envelope execution.
Yes. For Scandinavian and Alpine regions, wall insulation thicknesses can be increased up to 300-400mm with U-values down to 0.10 W/m²K.
Request a Project Quote
Prepare your project brief and connect directly with the SerVilla engineering team via WhatsApp.